diff --git a/base/zshrc b/base/zshrc
index 64c8de6..9719c0b 100644
--- a/base/zshrc
+++ b/base/zshrc
@@ -1,3 +1,10 @@
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
 # this is my zsh config. there are many like it, but this one is mine.
 # shellcheck shell=bash
 
diff --git a/config/zsh/p10k.zsh b/config/zsh/p10k.zsh
old mode 100755
new mode 100644
index de5cbdb..89b54b2
--- a/config/zsh/p10k.zsh
+++ b/config/zsh/p10k.zsh
@@ -1,7 +1,7 @@
-# Generated by Powerlevel10k configuration wizard on 2023-08-08 at 11:32 EEST.
-# Based on romkatv/powerlevel10k/config/p10k-lean.zsh, checksum 45810.
-# Wizard options: nerdfont-v3 + powerline, small icons, unicode, lean, 2 lines,
-# disconnected, no frame, compact, many icons, concise, transient_prompt,
+# Generated by Powerlevel10k configuration wizard on 2023-08-30 at 20:22 EEST.
+# Based on romkatv/powerlevel10k/config/p10k-lean.zsh, checksum 61526.
+# Wizard options: nerdfont-v3 + powerline, large icons, unicode, lean, 2 lines, dotted,
+# no frame, dark-ornaments, sparse, many icons, concise, transient_prompt,
 # instant_prompt=verbose.
 # Type `p10k configure` to generate another config.
 #
@@ -121,7 +121,7 @@
   typeset -g POWERLEVEL9K_MODE=nerdfont-v3
   # When set to `moderate`, some icons will have an extra space after them. This is meant to avoid
   # icon overlap when using non-monospace fonts. When set to `none`, spaces are not added.
-  typeset -g POWERLEVEL9K_ICON_PADDING=none
+  typeset -g POWERLEVEL9K_ICON_PADDING=moderate
 
   # Basic style options that define the overall look of your prompt. You probably don't want to
   # change them.
@@ -144,7 +144,7 @@
   typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=true
 
   # Add an empty line before each prompt.
-  typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=false
+  typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true
 
   # Connect left prompt lines with these symbols.
   typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX=
@@ -165,7 +165,7 @@
   # POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' ' below.
   typeset -g POWERLEVEL9K_SHOW_RULER=false
   typeset -g POWERLEVEL9K_RULER_CHAR='─'        # reasonable alternative: '·'
-  typeset -g POWERLEVEL9K_RULER_FOREGROUND=242
+  typeset -g POWERLEVEL9K_RULER_FOREGROUND=240
 
   # Filler between left and right prompt on the first prompt line. You can set it to '·' or '─'
   # to make it easier to see the alignment between left and right prompt and to separate prompt
@@ -173,10 +173,10 @@
   # the number of prompt lines. You'll probably want to set POWERLEVEL9K_SHOW_RULER=false
   # if using this. You might also like POWERLEVEL9K_PROMPT_ADD_NEWLINE=false for more compact
   # prompt.
-  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR=' '
+  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR='·'
   if [[ $POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_CHAR != ' ' ]]; then
     # The color of the filler.
-    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=242
+    typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_GAP_FOREGROUND=240
     # Add a space between the end of left prompt and the filler.
     typeset -g POWERLEVEL9K_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=' '
     # Add a space between the filler and the start of right prompt.
@@ -241,7 +241,7 @@
     .java-version
     .perl-version
     .php-version
-    .tool-version
+    .tool-versions
     .shorten_folder_marker
     .svn
     .terraform
@@ -1438,7 +1438,7 @@
   # Show gcloud only when the command you are typing invokes one of these tools.
   # Tip: Remove the next line to always show gcloud.
   typeset -g POWERLEVEL9K_GCLOUD_SHOW_ON_COMMAND='gcloud|gcs|gsutil'
-  # Google cloud color.
+   # Google cloud color.
   typeset -g POWERLEVEL9K_GCLOUD_FOREGROUND=32
 
   # Google cloud format. Change the value of POWERLEVEL9K_GCLOUD_PARTIAL_CONTENT_EXPANSION and/or