zshrc: op and ansible config locations

config/starship.toml

@@ -13,8 +13,8 @@ disabled = true
 
 [git_branch]
 symbol = '🌱 '
-truncation_length = 4
+truncation_length = 20
-truncation_symbol = ''
+truncation_symbol = '…'
 ignore_branches = ['master', 'main']
 
 [git_status]

host-lakka/zshrc

@@ -1,33 +1,72 @@
-PATH=$HOME/.local/bin:$HOME/bin:$HOME/.gem/bin:$HOME/.rvm/bin:/usr/local/bin:/usr/sbin:/usr/bin:$PATH
+# Lakka zsh configuration.
+#
+# shellcheck shell=bash
+export PATH="/usr/local/bin:/usr/bin:/usr/sbin:$PATH"
 
+# Defaults
+export DOTFILES="$HOME/.dotfiles"
+
+# Explicitly set XDG folders
+# https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html
+export XDG_DATA_HOME="$HOME/.local/share"
+export XDG_CONFIG_HOME="$HOME/.config"
+export XDG_STATE_HOME="$HOME/.local/state"
+export XDG_BIN_HOME="$HOME/.local/bin" # this one is custom
+
+# z, https://github.com/rupa/z
+export _Z_DATA="$XDG_STATE_HOME/z"
+
+# composer, https://getcomposer.org/
+if command -v composer &> /dev/null; then
+    export COMPOSER_HOME="$XDG_STATE_HOME/composer"
+    export COMPOSER_BIN="$COMPOSER_HOME/vendor/bin"
+    export PATH="$COMPOSER_BIN:$PATH"
+fi
+
+# gem, rubygems
+if command -v gem &>/dev/null; then
+    export GEM_HOME="$XDG_STATE_HOME/gem"
+    export PATH="$GEM_HOME/bin:$PATH"
+fi
+
+export PATH="$XDG_BIN_HOME:$HOME/bin:$HOME/.rvm/bin:$PATH"
 export LC_ALL=fi_FI.utf8
 
-source $HOME/.local/bin/antigen
+# Antigen configuration
+# https://github.com/zsh-users/antigen/wiki/Configuration
+export ADOTDIR="$XDG_DATA_HOME/antigen"
+export ANTIGEN_SYSTEM_RECEIPT_F=".local/share/antigen/antigen_system_lastupdate"
+export ANTIGEN_PLUGIN_RECEIPT_F=".local/share/antigen/antigen_plugin_lastupdate"
 
-antigen use oh-my-zsh
+# Try to load antigen, if present
+[[ -f "$XDG_BIN_HOME/antigen.zsh" ]] && source "$XDG_BIN_HOME/antigen.zsh"
 
-antigen bundle git
+# If antigen was loaded
-antigen bundle php
+if command -v antigen &> /dev/null; then
-# antigen bundle rvm
+  antigen use oh-my-zsh
-antigen bundle autojump
-antigen bundle command-not-found
-antigen bundle jreese/zsh-titles
-antigen bundle zsh-users/zsh-syntax-highlighting
-antigen bundle zsh-users/zsh-completions
-antigen bundle unixorn/rvm-plugin
-antigen bundle unixorn/autoupdate-antigen.zshplugin
 
-antigen theme oskarkrawczyk/honukai-iterm-zsh honukai
+  hash git 2>/dev/null && antigen bundle git
+  hash php 2>/dev/null && antigen bundle php
 
-antigen apply
+  antigen bundle autojump
+  antigen bundle command-not-found
+  antigen bundle jreese/zsh-titles
+  antigen bundle zsh-users/zsh-syntax-highlighting
+  antigen bundle zsh-users/zsh-completions
+  antigen bundle unixorn/rvm-plugin
+  antigen bundle unixorn/autoupdate-antigen.zshplugin
+
+  antigen theme oskarkrawczyk/honukai-iterm-zsh honukai
+
+  antigen apply
+fi
 
 alias t='tail -f'
 alias logrotate='/usr/sbin/logrotate -s $HOME/logs/state'
 alias dn='du -chd1'
 alias nano='nano -wS -$'
-alias cat=bat
 alias gpg=gpg2
 
-PATH=$PATH:$HOME/.rvm/bin # Add RVM to PATH for scripting
+export PATH="$PATH:$HOME/.rvm/bin" # Add RVM to PATH for scripting
 [[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" ]] # Load RVM into a shell session *as a function*
-. "/home/users/viir/.acme.sh/acme.sh.env"
+. "$HOME/.acme.sh/acme.sh.env"

local/bin/dfm

@@ -26,16 +26,15 @@ function section_reset
       ;;
     nvim)
       rm -rf ~/.local/share/nvim ~/.local/state/nvim ~/.cache/nvim ~/.config/astronvim ~/.config/nvim
-      msg_done "Deleted old nvim files"
+      msg_ok "Deleted old nvim files"
       ln -s ~/.dotfiles/config/astronvim ~/.config/astronvim
       ln -s ~/.dotfiles/config/nvim ~/.config/nvim
-      msg_done "Linked nvim and astronvim"
+      msg_ok "Linked nvim and astronvim"
       $0 install brew
       $0 install ext_go
       $0 install ext_npm
-      msg_done "Installed brew, and packages for go and npm"
+      msg_ok "Installed brew, and packages for go and npm"
-      nvim  --headless -c 'autocmd User PackerComplete quitall'
+      msg_done "...and we are done!"
-      msg_done "Installed nvim packages and we are now ready"
       ;;
     *)
       menu_section "$USAGE_PREFIX" "all | nvim"

local/bin/iterm2_shell_integration.zsh

@@ -0,0 +1,178 @@
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
+
+if [[ -o interactive ]]; then
+  if [ "${ITERM_ENABLE_SHELL_INTEGRATION_WITH_TMUX-}""$TERM" != "tmux-256color" -a "${ITERM_ENABLE_SHELL_INTEGRATION_WITH_TMUX-}""$TERM" != "screen" -a "${ITERM_SHELL_INTEGRATION_INSTALLED-}" = "" -a "$TERM" != linux -a "$TERM" != dumb ]; then
+    ITERM_SHELL_INTEGRATION_INSTALLED=Yes
+    ITERM2_SHOULD_DECORATE_PROMPT="1"
+    # Indicates start of command output. Runs just before command executes.
+    iterm2_before_cmd_executes() {
+      if [ "$TERM_PROGRAM" = "iTerm.app" ]; then
+        printf "\033]133;C;\r\007"
+      else
+        printf "\033]133;C;\007"
+      fi
+    }
+
+    iterm2_set_user_var() {
+      printf "\033]1337;SetUserVar=%s=%s\007" "$1" $(printf "%s" "$2" | base64 | tr -d '\n')
+    }
+
+    # Users can write their own version of this method. It should call
+    # iterm2_set_user_var but not produce any other output.
+    # e.g., iterm2_set_user_var currentDirectory $PWD
+    # Accessible in iTerm2 (in a badge now, elsewhere in the future) as
+    # \(user.currentDirectory).
+    whence -v iterm2_print_user_vars > /dev/null 2>&1
+    if [ $? -ne 0 ]; then
+      iterm2_print_user_vars() {
+          true
+      }
+    fi
+
+    iterm2_print_state_data() {
+      local _iterm2_hostname="${iterm2_hostname-}"
+      if [ -z "${iterm2_hostname:-}" ]; then
+        _iterm2_hostname=$(hostname -f 2>/dev/null)
+      fi
+      printf "\033]1337;RemoteHost=%s@%s\007" "$USER" "${_iterm2_hostname-}"
+      printf "\033]1337;CurrentDir=%s\007" "$PWD"
+      iterm2_print_user_vars
+    }
+
+    # Report return code of command; runs after command finishes but before prompt
+    iterm2_after_cmd_executes() {
+      printf "\033]133;D;%s\007" "$STATUS"
+      iterm2_print_state_data
+    }
+
+    # Mark start of prompt
+    iterm2_prompt_mark() {
+      printf "\033]133;A\007"
+    }
+
+    # Mark end of prompt
+    iterm2_prompt_end() {
+      printf "\033]133;B\007"
+    }
+
+    # There are three possible paths in life.
+    #
+    # 1) A command is entered at the prompt and you press return.
+    #    The following steps happen:
+    #    * iterm2_preexec is invoked
+    #      * PS1 is set to ITERM2_PRECMD_PS1
+    #      * ITERM2_SHOULD_DECORATE_PROMPT is set to 1
+    #    * The command executes (possibly reading or modifying PS1)
+    #    * iterm2_precmd is invoked
+    #      * ITERM2_PRECMD_PS1 is set to PS1 (as modified by command execution)
+    #      * PS1 gets our escape sequences added to it
+    #    * zsh displays your prompt
+    #    * You start entering a command
+    #
+    # 2) You press ^C while entering a command at the prompt.
+    #    The following steps happen:
+    #    * (iterm2_preexec is NOT invoked)
+    #    * iterm2_precmd is invoked
+    #      * iterm2_before_cmd_executes is called since we detected that iterm2_preexec was not run
+    #      * (ITERM2_PRECMD_PS1 and PS1 are not messed with, since PS1 already has our escape
+    #        sequences and ITERM2_PRECMD_PS1 already has PS1's original value)
+    #    * zsh displays your prompt
+    #    * You start entering a command
+    #
+    # 3) A new shell is born.
+    #    * PS1 has some initial value, either zsh's default or a value set before this script is sourced.
+    #    * iterm2_precmd is invoked
+    #      * ITERM2_SHOULD_DECORATE_PROMPT is initialized to 1
+    #      * ITERM2_PRECMD_PS1 is set to the initial value of PS1
+    #      * PS1 gets our escape sequences added to it
+    #    * Your prompt is shown and you may begin entering a command.
+    #
+    # Invariants:
+    # * ITERM2_SHOULD_DECORATE_PROMPT is 1 during and just after command execution, and "" while the prompt is
+    #   shown and until you enter a command and press return.
+    # * PS1 does not have our escape sequences during command execution
+    # * After the command executes but before a new one begins, PS1 has escape sequences and
+    #   ITERM2_PRECMD_PS1 has PS1's original value.
+    iterm2_decorate_prompt() {
+      # This should be a raw PS1 without iTerm2's stuff. It could be changed during command
+      # execution.
+      ITERM2_PRECMD_PS1="$PS1"
+      ITERM2_SHOULD_DECORATE_PROMPT=""
+
+      # Add our escape sequences just before the prompt is shown.
+      # Use ITERM2_SQUELCH_MARK for people who can't mdoify PS1 directly, like powerlevel9k users.
+      # This is gross but I had a heck of a time writing a correct if statetment for zsh 5.0.2.
+      local PREFIX=""
+      if [[ $PS1 == *"$(iterm2_prompt_mark)"* ]]; then
+        PREFIX=""
+      elif [[ "${ITERM2_SQUELCH_MARK-}" != "" ]]; then
+        PREFIX=""
+      else
+        PREFIX="%{$(iterm2_prompt_mark)%}"
+      fi
+      PS1="$PREFIX$PS1%{$(iterm2_prompt_end)%}"
+      ITERM2_DECORATED_PS1="$PS1"
+    }
+
+    iterm2_precmd() {
+      local STATUS="$?"
+      if [ -z "${ITERM2_SHOULD_DECORATE_PROMPT-}" ]; then
+        # You pressed ^C while entering a command (iterm2_preexec did not run)
+        iterm2_before_cmd_executes
+        if [ "$PS1" != "${ITERM2_DECORATED_PS1-}" ]; then
+          # PS1 changed, perhaps in another precmd. See issue 9938.
+          ITERM2_SHOULD_DECORATE_PROMPT="1"
+        fi
+      fi
+
+      iterm2_after_cmd_executes "$STATUS"
+
+      if [ -n "$ITERM2_SHOULD_DECORATE_PROMPT" ]; then
+        iterm2_decorate_prompt
+      fi
+    }
+
+    # This is not run if you press ^C while entering a command.
+    iterm2_preexec() {
+      # Set PS1 back to its raw value prior to executing the command.
+      PS1="$ITERM2_PRECMD_PS1"
+      ITERM2_SHOULD_DECORATE_PROMPT="1"
+      iterm2_before_cmd_executes
+    }
+
+    # If hostname -f is slow on your system set iterm2_hostname prior to
+    # sourcing this script. We know it is fast on macOS so we don't cache
+    # it. That lets us handle the hostname changing like when you attach
+    # to a VPN.
+    if [ -z "${iterm2_hostname-}" ]; then
+      if [ "$(uname)" != "Darwin" ]; then
+        iterm2_hostname=`hostname -f 2>/dev/null`
+        # Some flavors of BSD (i.e. NetBSD and OpenBSD) don't have the -f option.
+        if [ $? -ne 0 ]; then
+          iterm2_hostname=`hostname`
+        fi
+      fi
+    fi
+
+    [[ -z ${precmd_functions-} ]] && precmd_functions=()
+    precmd_functions=($precmd_functions iterm2_precmd)
+
+    [[ -z ${preexec_functions-} ]] && preexec_functions=()
+    preexec_functions=($preexec_functions iterm2_preexec)
+
+    iterm2_print_state_data
+    printf "\033]1337;ShellIntegrationVersion=14;shell=zsh\007"
+  fi
+fi

zshrc

@@ -1,21 +1,28 @@
-# Fig pre block. Keep at the top of this file.
-[[ -f "$HOME/.fig/shell/zshrc.pre.zsh" ]] && builtin source "$HOME/.fig/shell/zshrc.pre.zsh"
 # shellcheck shell=bash
 
 autoload -U colors zsh/terminfo
 colors
 
-export HOMEBREW="/opt/homebrew"
+# Defaults
 export DOTFILES="$HOME/.dotfiles"
-export PATH="$HOMEBREW/opt/ruby/bin:$HOMEBREW/bin:$HOMEBREW/sbin:/usr/local/sbin:$PATH"
-export HOMEBREW_NO_ENV_HINTS=1
 
-# Explicitely set XDG folders
+# Explicitly set XDG folders
 # https://specifications.freedesktop.org/basedir-spec/basedir-spec-latest.html
 export XDG_DATA_HOME="$HOME/.local/share"
 export XDG_CONFIG_HOME="$HOME/.config"
 export XDG_STATE_HOME="$HOME/.local/state"
+export XDG_BIN_HOME="$HOME/.local/bin" # this one is custom
 
+# Homebrew configuration
+export HOMEBREW="/opt/homebrew"
+export HOMEBREW_BIN="$HOMEBREW/bin"
+export HOMEBREW_SBIN="$HOMEBREW/sbin"
+export HOMEBREW_PKG="$HOMEBREW/opt"
+export HOMEBREW_NO_ENV_HINTS=1
+
+export PATH="$XDG_BIN_HOME:$HOMEBREW_BIN:$HOMEBREW_SBIN:/usr/local/sbin:$PATH"
+
+# brew, https://brew.sh
 if [ command -v brew &> /dev/null ]; then
     BREW_BIN=$(brew --prefix)/bin
     BREW_SBIN=$(brew --prefix)/sbin
@@ -40,22 +47,38 @@ if command -v nvim &> /dev/null; then
     export EDITOR="nvim"
 fi
 
-LOCAL_BIN="$HOME/.local/bin"
+# z, https://github.com/rupa/z
-COMPOSER_DIR="$HOME/.composer/vendor/bin"
+export _Z_DATA="$XDG_STATE_HOME/z"
-export PATH="$LOCAL_BIN:$COMPOSER_DIR:$PATH"
 
-export NVM_DIR="$HOME/.nvm"
+# composer, https://getcomposer.org/
+if command -v composer &> /dev/null; then
+    export COMPOSER_HOME="$XDG_STATE_HOME/composer"
+    export COMPOSER_BIN="$COMPOSER_HOME/vendor/bin"
+    export PATH="$COMPOSER_BIN:$PATH"
+fi
+
+# gem, rubygems
+if command -v gem &>/dev/null; then
+    export GEM_HOME="$XDG_STATE_HOME/gem"
+    export GEM_PATH="$XDG_STATE_HOME/gem"
+fi
+
+# nvm, the node version manager
+export NVM_DIR="$XDG_STATE_HOME/nvm"
 export NVM_LAZY_LOAD=true
 export NVM_COMPLETION=true
 export NVM_AUTO_USE=true
-[ -s "/opt/homebrew/opt/nvm/nvm.sh" ] && \. "/opt/homebrew/opt/nvm/nvm.sh"
+[ -s "$HOMEBREW_PKG/nvm/nvm.sh" ] && \. "$HOMEBREW_PKG/nvm/nvm.sh"
-[ -s "/opt/homebrew/opt/nvm/etc/bash_completion.d/nvm" ] && \. "/opt/homebrew/opt/nvm/etc/bash_completion.d/nvm"
+[ -s "$HOMEBREW_PKG/nvm/etc/bash_completion.d/nvm" ] && \. "$HOMEBREW_PKG/nvm/etc/bash_completion.d/nvm"
+
+# wakatime, https://github.com/wakatime/wakatime-cli
+export WAKATIME_HOME="$XDG_STATE_HOME/wakatime"
 
 # Run x-load-configs in your terminal to reload the files.
 function x-load-configs()
 {
     # Load the shell dotfiles, and then some:
-    for file in ~/.dotfiles/config/{exports,alias,functions}; do
+    for file in $DOTFILES/config/{exports,alias,functions}; do
         [ -r "$file" ] && [ -f "$file" ] && source "$file"
         [ -r "$file-secret" ] && [ -f "$file-secret" ] && source "$file-secret"
         [ -r "$file-$HOSTNAME" ] && [ -f "$file-$HOSTNAME" ] && source "$file-$HOSTNAME"
@@ -67,15 +90,19 @@ x-load-configs
 # Import ssh keys in keychain
 ssh-add -A 2>/dev/null;
 
+# Antigen configuration
+# https://github.com/zsh-users/antigen/wiki/Configuration
+export ADOTDIR="$XDG_DATA_HOME/antigen"
+export ANTIGEN_SYSTEM_RECEIPT_F=".local/share/antigen/antigen_system_lastupdate"
+export ANTIGEN_PLUGIN_RECEIPT_F=".local/share/antigen/antigen_plugin_lastupdate"
+
 # Try to load antigen, if present
-[[ -f "$HOME/.local/bin/antigen.zsh" ]] && source "$HOME/.local/bin/antigen.zsh"
+[[ -f "$XDG_BIN_HOME/antigen.zsh" ]] && source "$XDG_BIN_HOME/antigen.zsh"
 
 # antigen is present
 if command -v antigen &> /dev/null; then
     antigen use oh-my-zsh
 
-    # antigen theme oskarkrawczyk/honukai-iterm-zsh honukai
-
     antigen bundle ssh-agent
     antigen bundle colored-man-pages
     antigen bundle jreese/zsh-titles
@@ -84,16 +111,14 @@ if command -v antigen &> /dev/null; then
     antigen bundle MichaelAquilina/zsh-you-should-use
     antigen bundle unixorn/autoupdate-antigen.zshplugin
     antigen bundle Sparragus/zsh-auto-nvm-use
-    # antigen bundle git-auto-fetch
 
     hash php 2>/dev/null && antigen bundle php
     hash nvm 2>/dev/null && antigen bundle nvm
     hash docker 2>/dev/null && antigen bundle docker
     # hash ruby 2>/dev/null && antigen bundle ruby
-    # hash python 2>/dev/null && antigen bundle MichaelAquilina/zsh-autoswitch-virtualenv
+    hash python 2>/dev/null && antigen bundle MichaelAquilina/zsh-autoswitch-virtualenv
     hash jq 2>/dev/null && antigen bundle reegnz/jq-zsh-plugin
     hash docker-compose 2>/dev/null && antigen bundle sroze/docker-compose-zsh-plugin
-    # antigen bundle voronkovich/phpcs.plugin.zsh
 
     # Platform dependant bundles
     if [[ $(uname) == 'Linux' ]]; then
@@ -113,9 +138,18 @@ fi
 
 # op (1Password cli) is present
 if hash op 2>/dev/null; then
+    export OP_CACHE="$XDG_STATE_HOME/1password"
+    mkdir -p $OP_CACHE;
     eval "$(op completion zsh)"; compdef _op op
 fi
 
+# Ansible configuration
+# https://docs.ansible.com/ansible/latest/reference_appendices/config.html
+if hash ansible 2>/dev/null; then
+    export ANSIBLE_HOME="$XDG_STATE_HOME/ansible"
+    mkdir -p "$ANSIBLE_HOME"
+fi
+
 # gcloud is present
 #if hash gcloud 2>/dev/null; then
 #    GCLOUD_LOC=$(gcloud info --format="value(installation.sdk_root)" --quiet)
@@ -123,7 +157,8 @@ fi
 #    [[ -f "$GCLOUD_LOC/completion.zsh.inc" ]] && builtin source "$GCLOUD_LOC/completion.zsh.inc"
 #fi
 
-eval "$(starship init zsh)"
+# Load iterm2 shell integration
+# https://iterm2.com/documentation-shell-integration.html
+[[ -f "$XDG_BIN_HOME/iterm2_shell_integration.zsh" ]] && source "$XDG_BIN_HOME/iterm2_shell_integration.zsh"
 
-# Fig post block. Keep at the bottom of this file.
+eval "$(starship init zsh)"
-[[ -f "$HOME/.fig/shell/zshrc.post.zsh" ]] && builtin source "$HOME/.fig/shell/zshrc.post.zsh"